❶ 设备使用手册 翻译成英文这么说
如果是你们自己做的设备，给人家配说明书，
user's manual在工业领域很常用；
如果是专业书籍也可这么说，还可以说；
equipment specification;
因为specification很正式，有规范的意思
例如：
design specification设计规格, 设计说明(书)
engine specification发动机说明书
technical specification技术规范[说明]
❷ 急求翻译一本机械说明书（高分）
翻译： 中文 » 英语
DZG(F) 型给料机使用说明书 1.用途及简介 DZG(F)型自同步惯性振动给料机广泛适用于冶金、矿山、煤炭、建材、电力、粮食、和化工等行业，用以把块状、颗粒状及粉状物料从贮料仓或漏斗中均匀连续或定量的给到受料装置中去；例如将破碎机、筛分设备、运输机械、包装机械等散装物料输送到指定地点。 2.工作原理与结构特征该给料机的运动给单质量强迫振动系统，激振器为一对带有偏心块的振动电机。其利用振动电机驱动异向自同步理论进行工作；沿激振夹角作抛掷运动而使给料槽产生振动，槽体的运动诡计为直线；给料机的给料过程是以给料槽沿倾斜方向作往复直线振动来实现的；当槽体振动加速度的分量大于重力加速度在垂直槽底方向的分量时，槽中物料被抛起，并按抛物线的轨迹向前进行跳跃运动，槽体每振动一次，物料将被抛起一次；这样，物料连续以槽体振动频率向前跳跃，达到给料的目的。该给料机由槽体、弹簧减振装置和振动电机组成。其具有结构简单、处理量大、噪音低、能耗低、安装、操作、维修方便等特点。产品型号说明（翻译下面的名词）： 1. 槽体长度（dm) 2. 槽体宽度（dm） 3. 封闭型（敞开型不注） 4. 给料机 5. 直线振动 6. 给料机 7. 主要性能及技术参数 8. DZG型给料机主要技术参数给料量、给料粒度、振频、功率、最大激振力、重量 9. DZG型给料机技术参数和外型尺寸主要安装尺寸 10.DZG型给料机主要安装尺寸
DZG (F)-feeder Manual
1. Purposes and briefings
DZG (F) self-synchronous inertial vibration feeder widely applicable to the metallurgical, mining, coal, building materials, electricity, food, and chemical instries, for the massive, granular and powdery materials from the storage bin or hopper In uniform for the quantitative or the device to give in to, for example, will be broken machines, screening equipment, transport machinery, packaging machinery, and other bulk materials transported to designated locations.
2. Principle and structural characteristics of
The feeder to the campaign-quality force vibration system, vibration for a pair of eccentric block with the vibration motor. Its use of different vibration motor drive to self-synchronization of work; angle along the exciting sport for throwing Liaocao而使to generate vibration, the trough of campaign tricks for a straight line;
Feeder to the process is expected to tilt the direction of Liaocao for reciprocating along a straight line to achieve the vibration when the trough of vibration acceleration is greater than the amount of vertical acceleration of gravity in the direction of the bottom component, the tank materials were Toss, And the parabolic trajectory forward to jumping movement, every vibration of a trough, the material will be Toss once, so that materials for a slot in frequency jump forward, expected to reach the objective.
The feeder from the trough of, spring and vibration damping device electrical components. Its simple structure, large capacity, low noise, low energy consumption, installation, operation, maintenance and other convenient features.
Model (translation of the following terms):
1. Trough in length (dm)
2. Groove width (dm)
3. Closed (not open-Note)
4. Feeder
5. Linear vibration
6. Feeder
7. Major performance and technical parameters
8. DZG-feeder main technical parameters
To Liaoliang, feed particle size, vibration frequency, power, the most exciting force, weight
9. DZG-feeder technical parameters and size of appearance
Size main installation
10.DZG-feeder main installation size
❸ 这可能是机械相关的问题，今天看到一个英文说明书，里面在每个机器的英文后面都带有SP、MP、PP的字样
SP: SAMPLE PRODUCT(打样）
PP: PILOT PRODUCT（试产）
MP: MASS PRODUCT（量产）
❹ 急求翻译一本机械说明书（高分二）
Installation, adjustment and commissioning
1. Inertia in this series since the synchronous vibration feeder used as feed, the recommendation of the mping 10 ° installation, the water content of more viscous materials and the materials may also be inclined to under 15 °; Ingredients such as the Internet, quantitative feeding, feeding to ensure the uniform stability and to prevent the material gravity, the feeder should be the level of installation, hanging installations flexible link.
2. After the installation around the feeder should be left not less than 20 mm of travel clearance so that the feeder is completely free state.
3. After the installation of feeder horizontal level requirements, so as to avoid feeding at the side of cheap materials.
4. Principle of the electrical wiring, and ground protection.
5. Before driving under the exciting force to be checked at both ends of the two vibrators fixed eccentric block, adjustable eccentric angle is the same as the block to check whether the fasteners completely secure fastening; inspection of electrical wiring and insulation is good .
6. Test launch, observed two vibrators whether to reverse inertia isokinetic operation, if the reverse operation, of which a vibrator for the arbitrary power of the two-phase wiring.
7. Amplitude observation car, jumped expected direction, whether in the current within the current rating; Liaocao horizontal size of the move, whether they are consistent with the hanging elastic; voice is normal, Liaoliang whether to meet the requirements, if not met, the adjustable eccentric The angle between the block. Use and operation .
1. Since its inertial vibration feeder allows synchronization with the full voltage directly under the conditions of launch and parking, in order to stop stable and fast through the resonance, allowing parking brake, and adapt to various electrical braking, if Consumption brake, Fan Jie, such as braking.
2. Inertial vibration feeder self-synchronization of its proction to a continuous operation before the time of not less than four hours of no-load test; equipment at the scene After installation, should also be short-term trial operation in the process of trial operation, amplitude and In addition to the current and voltage fluctuations, changes should be stability remain the same.
3. The self-synchronization of the inertial vibration feeder proctivity can be used the following method of regulation:
a. use by Deputy FM controller, to achieve non-stop machine Promise conditioning proctivity.
b. parking regulation by the inertia vibrator eccentric block to realize the proctivity of Promise regulation.
c. regulating the hopper gate opened, the change to the Liaoliang to achieve regulation feeder proctivity purposes.
1.maintenance. Feeder in the course of operation to carry out regular checks and amplitude of the current inertia vibrator and the stability of the surface dynamic, unusual phenomenon, should immediately stop processing.
2.Inertia vibrators bearing lubrication is the entire feeder normal work of the key, therefore, should be in use on a regular basis to add the bearing MoS2 2 # grease, plus a two-month general, a high-temperature Jijue Canada first greases on.